Table of Contents
Advertisement
( 16 ) Software Upgrade
Software Upgrade - TFTP Server
Note:
During the Software upgrading, in your computer, make sure that under CONTROL PANEL >
NETWORK CONNECTION, the Local Area Connection of the CYBERPHONE is present.
Please also take note of the IP address at the startup screen You should only start your
TFTP program after this.
Important:
Do not disconnect the phone from the PC while it is in firmware upgrading progress.
Doing so will permanently damage the phone.
- To upgrade to the latest software, key in the service provider's IP address and
the software will be upgraded. To do so:
Step:1 - Insert USB cable to the phone
Step:2 - In the CYBERPHONE, go to > MENU > SETTINGS > SOFTWARE UPGRADE > TFTP SERVER >
key in the IP address for e.g:- > 192.168.1.2 > OK > windows XP should prompt you for installation
of the USB driver.
Note:
The IP address you enter in the TFTP server is the address where you wish to download the
image file from.
Step:3 - Install the driver using "athenac902.sys" which is provided on the DAVISCOMMS website at:
www.daviscomms.com.sg
Step:4 - In your computer, under CONTROL PANEL > NETWORK CONNECTIONS, a new
Local Area Connection should appear.
41
Advertisement
Table of Contents
