Connecting Your Phone To An Sip - Daviscomms CYBERPHONE User Manual

3:

Connecting your phone to an SIP

Note: - Before you proceed to making a call, you will first need to set up the CYBERPHONE to
register to a SIP server connection.
For reference please refer to
Step.1 - From the idle screen, select > MENU > CONFIG > SIP > USER NAME > input your user name
according to your SIP account details and select > OK.
Step.2 - In the same SIP settings menu, select > PASSWORD > input your password according to your
SIP account details and select > OK.
Step.3 - In the same SIP settings menu, select > PROXY SERVER > IP ADDRESS > key in the address
of your SIP server, for example, > SIPprovider.org and select > OK.
Step.4 - In the Proxy Server settings menu, select > STATUS > and select > ENABLE.
Step.5 - Go back to the SIP settings menu, select > OUTBOUND PROXY > IP ADDRESS > key in the
IP address of your SIP server, for example, > SIPprovider.org and select > OK.
Step.6 - In the Outbound Proxy settings menu, select > STATUS > and select > ENABLE.
Step.7 - Go back to the SIP settings menu, select > ACTIVATE by pressing the left soft key
Note: - After activating, a "Registering SIP..." display will be appear at the Idle screen.
The "Not Registered" sign will disappear on the idle screen to indicate that your
CYBERPHONE is connected to your SIP server account.
14
Step.8 - You are now ready to make a SIP to SIP call via SIP server.
www.daviscomms.com.sg
OPTIONS HANDFREE
.