Table of Contents
Advertisement
Chapter 2. Using the addSDI
Opening the packages
The A725 addSDI Remote Telemetry Unit (RTU) is part of the A7xx
series. For testing purposes, you should have an A840 Telemetry
Gateway installed before you install the A725 RTU. For informa-
tion about installing the A840, refer to the Base Station, Telemetry
Gateway A840 and Wireless Modem A440 User Guide .
The addSDI RTU package contains the A725 RTU, an antenna, and
a pipe clamp. If ordered, the following items come in separate
packaging:
•
A solar panel and pipe clamp
•
A set of aluminum poles
•
A LED tool
•
Sensors and cables, one box for each sensor.
Make sure you have received all the equipment and read through
the instructions that follow. Once you are sure to understand
them, you are ready to install your RTU.
5
Advertisement
Table of Contents
