Connectivity - Philips CT 9A9R User Manual

Connectivity

Network settings
The network name will be displayed on the idle
screen. If the phone is not able to identify the
network name, it will display the country code and
the network code of the unknown network.
Select network
It will vary according to the search mode you have
selected. If you select
Automatic
searched automatically. If you select Manual, the
search will commence only when you confirm to start
searching.
Search mode
You can select
Automatic
Preferred Network
Preferred network list is stored in the SIM card.
It specifies the priority by which your phone will
register to the available network during automatic
registration.
1. In idle mode, press
2. Select >
Settings Connectivity
>
Preferred network
Settings
the network will be
or Manual.
,
to enter the main menu.
>
Network settings
,
and press .
, C
3. Press or OK to enter the preferred network
list. The most preferred network will be at the
top of the list.
+ -
4. Press / to select a certain network and press
, C
or
Select.
5. You will be given options to
available network, Add existing network
network code.
Browser
Various parameters relative to browser can be set
under this option, including WAP parameters and
Push message.
WAP profiles
You can set up to 5 groups of WAP profiles. You can
can activate and use one of the profiles. At the same
time, you can edit or directly connect to the address.
Select Edit to access the following settings:
• Name: A name to identify the server.
• address: The numeric address of the server in
IP
nnn.nnn.nnn.nnn format.
• Port: The port number on the server. The number
is usually 9201.
• Homepage: The URL of the message server.
Delete network, Add
and Add
76