Sony IPELA PCS-G50 Manual page 5

Page 2/3
2 /3
NAT Mode
NAT Address
Port Number
Line I/F
Number Display
NAT Mode
Selects whether to use NAT mode.
Auto (UPnP): Enable the UPnP function.
On: Enable NAT mode.
Off: Disable NAT mode.
NAT Address
Enter the IP address of a global network to be used for
NAT mode.
Note
This item can only be set when "NAT Mode" is set to
"On."
Port Number
Enter the port number to be used for NAT mode.
Note
This item can only be set when "NAT Mode" is set to
"On."
Line I/F
Selects the line interface to be used normally.
IP: Connects a videoconferencing system via a LAN.
ISDN: Connects a videoconferencing system via ISDN.
ISDN (Telephone): Connects an audio-only telephone
via ISDN (Voice Meeting).
IPELA VC Link: Connects a videoconferencing system
via IPELA VC Link.
Number Display
Select the IP address or other number to display in the
launcher menu as identification of your system.
GK:User Alias: Displays the user name registered in the
gatekeeper when you use the gatekeeper.
GK:User Number: Displays the user number registered
in the gatekeeper when you use the gatekeeper.
NAT: Address: Display your NAT address when
connected to a network using NAT.
IP: Display your IP address.
IPELA VC Link: Display your IPELA VC Link number.
5
Details of IPELA VC Link Setup
IPELA VC Link
Off
. . .
5060
IP
IP:
Save Cancel
No display: Does not display any number identifying the
system.
Page 3/3
Individual Settings
Allows you to select whether to perform transmission,
reception, and multipoint settings individually.
On: Select to perform transmission, reception, and
multipoint settings individually.
Off: Select to perform all settings simultaneously.
LAN Bandwidth
Select the bandwidth to be used for transmission,
reception, and multipoint conferencing.
Available settings are 64 Kbps, 128 Kbps, 256 Kbps,
384 Kbps, 512 Kbps, 768 Kbps, 1024 Kbps, 2 Mbps,
4 Mbps, and "other."
When "Other" is selected, a bandwidth value between 1
and 4096 Kbps can be entered.
If you set "Individual Settings" to "On", you can perform
this setting individually for transmission, reception, and
multipoint conferencing.