LG CR820 User Manual page 90

Troubleshooting
Symptom
Cannot If the connection cannot be made
connect the with the WPS function, refer to the
wireless LAN instruction manual of your wireless
terminal LAN terminal, check the setting of
the WPS function, and then make
connecting operation again.
When connecting the wireless LAN
terminal to which PIN code from WPS
is specified, check if "WPS PIN" is
selected in WPS function settings
of this terminal and the correct PIN
code is set.
88
Check
Communication problems
Symptom
Communications Check if signals are received in the
service area.
are not possible
If a security code is set to the Micro
USIM, log in to the setting page and
enter PIN1 code.
Check the settings of this terminal
and the APN registration.
Depending on the radio wave
condition, the Internet connection
may not be available. In that case,
turn this terminal off and turn it
on again.
Check