LG CR820 User Manual page 89

Symptom
Cannot
If the security mode other than WEP2-PSK
is set to this terminal, you need to make the
connect the
same settings for the target wireless LAN
wireless LAN
terminal. For details, refer to the instruction
terminal
manual of your wireless LAN terminal.
• Example: Security mode is WEP
For Windows 7
Click
"Network and Internet"
Center"
Right click the name of this terminal and
"Properties"
- Security Type: no authentication
- Encryption Type: WEP
- Network Security Key: WEP key of this terminal
whose number is selected in Key index
Check
(Start) "Control panel)"
"Network and Sharing
"Manage Wireless Networks"
"Security" tab Set following:
Symptom
Cannot • Example: Security mode is WEP
For Mac OS 10.7
connect the
wireless LAN
[Apple] menu
Preferences...]
terminal
Select [Wi-Fi] on the left screen
[Edit network] on [Network]
Enter any name in [Untitled]
Check [Display Wi-Fi status on menu
bar]
tab located in the upper of screen
[ + ]
[WEP] in [Security]
1 of this terminal in [Password]
[OK]
the status is [OFF], and [Apply]
Check
[System
[ [Network]
[ + ]
[OK]
[Details] Select [Wi-Fi] on
Enter network name Select
Enter WEP key
[OK] Check [Wi-Fi ON] if
87