Table of Contents
Advertisement
Firewall (Default: Disable)
Set whether to activate the Firewall function.
- Enable: Firewall function is activated. You
can set IP filter.
- Disable: Firewall function is deactivated.
• When Enable is set
You can set IP filter.
IP address
When registering IP filter, enter source or
destination IP address.
Direction (Default: Source)
Specify the direction of communication to
interrupt.
- Source: Interrupt the access from the
specified IP address.
- Destination: Interrupt the access to the
specified IP address.
IP address filter list
List of registered IP filter appears.
-
: Delete registered IP filter.
4 Click [Apply].
Discarding WAN Ping
You can discard the Ping request to access
from WAN to prevent answering and
block the IP information leakage from this
terminal and LAN terminals.
73
Advertisement
Table of Contents
