Smeg WM61121 Instructions For Use Manual page 14

Start the operation Start the operation
Interruptions Interruptions
1
•
Push the START/PAUSE button (C). The ON/OFF
LED stops flashing, the machine starts operating
after a few seconds. If the door is not properly
closed after starting the operation, the ON/OFF
LED starts flashing again after a few seconds.
When you close the door, the machine initiates
the selected program.
•
In case you would like to alter the washing
program after the initiated washing operation,
turn the program selector for one second to the
position "0", followed by the selection of a new
program. Switching the machine off deletes any
previously selected additional functions - Rinse
hold, so they have to be reactivated.
- End of operation
Flashing ON/OFF LED indicates that the program
was completed.
•
Extract the laundry from the drum and remove
any alien objects from the door gasket.
•
Leave the door ajar to allow the interior to dry.
•
Close the water inlet faucet.
•
Switch the machine off by turning the program
selector to position "0".
•
By the user
Selecting Rinse hold function
Program is stopped when it comes to the Rinse hold
stage (if this function had been previously selected).
Drum door remains closed all the time. Indicator
LED above the rinse hold function starts flashing.
Washing procedure is continued by pressing the
START/PAUSE button (C).
Own interruption
You may also stop the program by turning the
program selector to the position "0". If there is water
in the drum select one of additional programs (drain,