Table of Contents
Advertisement
Before using for the first time
Activation failed
If connection cannot be established
despite activating the Con@ctivity
function on the cooker hood and hob,
the function must be deactivated on
both appliances and then the
procedure repeated.
Deactivating wireless connection
The hob and cooker hood must be
switched off.
Touch the run-on control for
approx. 10 seconds until 1 lights up.
Then touch in turn,
– the 1 control,
– then the B control,
– then the lighting control .
The cooker hood is now in signing on/
off mode.
If a wireless connection has already
been established, 2 and 3 will light up
constantly.
26
Touch the 1 control to deactivate
Con@ctivity 2.0.
2 will light up constantly, 3 will flash on
and off.
After a few seconds 2 and 3 will start
flashing on and off.
The wireless connection has now been
deactivated.
To deactivate the hob, see the hob
operating instructions.
Note that disabling the wireless
connection will also deactivate any
remote control function and this will
have to be activated again.
Advertisement
Table of Contents
