CASY Model DT
Brief instruction V 1.0E
Operating instructions
The power switch is positioned on the rear of the CASY
Model DT tower.
The top right-hand area of the control panel accommodates
the keys MENU, CANCEL, ENTER, NEXT,
enter the measuring and output parameters.
,
Display
The bottom right-hand area accommodates the keys START,
CLEAN, PRINT. used to control the measuring stand and
output the results to the printer or external computer.
used to
On the left are the keys L-CURSOR,
R-CURSOR used to position the evaluation cursors.
Defi nition of key functions:
MENU:
Starts the menu control.
CANCEL:
Cancels a measurement or entry.
ENTER:
Confi rms an entry.
NEXT:
Continue to next number.
:
Increases number/change selection.
:
Increases number/change selection.
START:
Starts a measurement.
CLEAN:
Starts one or several cleaning cycles.
PRINT:
Output to printer and/or serial interface.
L-CURSOR:
Positions left cursor.
:
Shifts cursor to the right.
:
Shifts cursor to the left.
R-CURSOR: Positions right cursor.
,
,
Need help?
Do you have a question about the CASY DT and is the answer not in the manual?
Questions and answers