Vectronic Aerospace VERTEX Lite Collar User Manual page 41

Beacon Mortality Mode
Beacon Patterns
This defines if at a mortality event the VHF should switch to
be always on (24/7) or remain schedule controlled (e.g.
short window only). The Default setting is: Always on
In this frame you can configure the VHF beacon pattern for
both the Standard and Mortality Mode active during a
mortality event. You can set the pulse length in milliseconds
(ms) and the Loop Length in ms.
internal usage only and can't be changed by the user.
NOTE: The default settings have been successfully used in
many studies. Changes will effect battery consumption.
Figure 27: VERTEX Lite User Configuration
Direct Collar Communication
The "pulse Type" is for
© 2017 VECTRONIC Aerospace GmbH
41