Vectronic Aerospace VERTEX Lite Collar User Manual page 40

Communication
Iridium
Globalstar
GSM
Beacon
Beacon Frequency
Beacon Power
The Iridium Mode (1-18) defines the number of fixes per
Iridium message. Please check
information about message set-up and size.
Recommendation: Mode 4
Choose one out of 3 modes: [0] Disabled, [1] 1 Position per
Message, [2] 2 Positions per Message
The GSM Mode defines number of fixes per SMS.
Recommendation: 8 fixes per message with VAS SIM
chips
7 fixes per message with SIM cards
from your own provider
You can change the destination address of all incoming
messages. By default it will be the number of VECTRONIC
ground station. If you are using your own ground station your
own mobile number is setup here.
You can configure the Reception Delay which depends on
the providers delay. The GSM module in the collar will
booked in the network for additional time to receive
messages.
Choose the frequency of your VHF beacon by simply typing
it into the field. You can only select frequency values
between the minimum and maximum value.
NOTE: Signal strength is best with the primarily set value
(hardware dependent), signal strength will slightly decrease
at the rim.
Recommendation: Stick to the default value of 10dBm as
it offers the optimum balance between signal strength and
energy consumption. Please contact our customer service if
you have questions.
Direct Collar Communication
Iridium Communication
© 2017 VECTRONIC Aerospace GmbH
40
for