Tools Checklist - Compac OPT SCR200 Installation Manual

Tools Checklist

Having all the correct tools will make installation, upgrade and repair procedures easy and
minimise the risk of damage to components.
Before you arrive on site, make sure you have a minimum of all the tools listed here:
NOTE: Make sure your cell phone and laptop are fully charged.
▪ 5.5mm nut driver
▪ 7mm nut driver
▪ 8mm nut driver
▪ T30 Torx drive bit or driver
▪ T10 Torx drive bit or driver
▪ Metric spanner set
▪ Metric 3/8" or 1/4" drive socket set
▪ 1/4" screwdriver bit holder
▪ 1/4" A/F spanner
▪ 6" adjustable spanner
▪ Flat blade screwdriver set (1.5 - 5mm blades)
▪ #0, #1, #2 Phillips screwdrivers
▪ #1, #2 Pozidriv screwdrivers
▪ Set of metric Allen (hex) keys
▪ Fine long nose pliers, side cutters & pliers
▪ Hacksaw
▪ Stanley knife or similar sharp blade
▪ Felt tip pen or marker
▪ Glue - Loctite 601 or similar
▪ Insulating tape and masking tape
▪ Ruler
▪ Multimeter
3.