Steam Ironing; Filling The Water Tank; Setting The Temperature - Rowenta FIRST CLASS Instructions For Use Manual

STEAM IRONING

Filling the water tank.

Note !
Your iron has been designed to operate using untreated tap water.
Important: Heat concentrates the elements contained in water during evapora-
tion.
The types of water listed below may contain organic waste, or chemical elements
that can cause spitting, brown staining, or premature wear of the appliance: water
from clothes dryers, scented or softened water, water from refrigerators, batte-
ries, air conditioners, rain water, boiled, filtered or bottled water.
Important : Before filling the water tank, unplug the iron .
The steam selector should be switched into the "OFF" position.
Do not hold the iron under the tap while filling.

Setting the temperature.

Your iron will only produce steam when the control is set within the coloured
zone and the steam switch is in the on position.
OK
5
2 min