Download Print this page
Chamberlain Kinetic Trolley Operating Instructions
Chamberlain Kinetic Trolley Operating Instructions

Chamberlain Kinetic Trolley Operating Instructions

Advertisement

Quick Links

Kinetic Trolley – Operating Instructions:
Please Note: do not open or tamper with the electrics under the top deck, as this will void all warranty and or may
cause serious injury to operators of the unit.
1) Check from the power indicator that the unit has sufficient charge and turn the unit on by pressing the red
power button located on the side of the steering shaft located on the right hand side of the battery
indicator.
To Operate the Unit:
2) To engage power supply, lower the handle so that it is almost in line with your waist, you should just be able
to see the top of the handle console.
Forward / Reverse Operation:
3) To go backwards (tow) use your thumb to press the toggle down and to go forwards (push) use your thumb
to press the toggle up.
Reverse
(press down)
Liftmaster Materials handling
ABN 74 005 237 525
www.liftmastermh.com.au
Forwards
(press up)

Advertisement

loading
Need help?

Need help?

Do you have a question about the Kinetic Trolley and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Chamberlain Kinetic Trolley

  • Page 1 ABN 74 005 237 525 www.liftmastermh.com.au Kinetic Trolley – Operating Instructions: Please Note: do not open or tamper with the electrics under the top deck, as this will void all warranty and or may cause serious injury to operators of the unit.
  • Page 2 Liftmaster Materials handling ABN 74 005 237 525 www.liftmastermh.com.au Steering the Kinetic Trolley: 1) To steer, either pull the handle from left or right. Buttons and Switches: 2) F.1 Shows the horn button located just above the red safety button for attracting attention. F2. shows the FAST/SLOW speed switch to adjust the power of the unit to suit your environment and towing needs.
  • Page 3 Faults: Should you encounter any major concerns with your Kinetic Trolley please ensure you check the following items first: 1. Loss of drive - Ensure the battery is fully charged and or the Tiller handle has been placed back in the upright position which resets the unit.