Long-Term Storage - Bell and Gossett e-80SC Series Instruction Manual

Series e-80SC
Figure 1: Proper lifting method

2.3 Long-term storage

If the unit is stored for more than 6 months, these requirements apply:
• Store in a covered and dry location.
• Store the unit free from heat, dirt, and vibrations.
• Rotate the shaft by hand several times at least every three months.
Treat bearing and machined surfaces so that they are well preserved. Refer to the drive
unit and coupling manufacturers for their long-term storage procedures.
For questions about possible long-term storage treatment services, please contact your
local sales and service representative.
Series e-80SC INSTRUCTION MANUAL
2 Transportation and Storage
Series e-80SC with optional ITSC/IT
7