LG-Nortel LDP-7016D Quick Manual page 27

LDP Keyset User Operation
Receiving calls _ Answering a Call While Idle :
1. Lift the handset and press the flashing Flex button (as
needed), the call will be connected.
Responding to a Call While Busy
.
1
Press Hold/Save and/or
2. Press the flashing CO line button
Answering Calls to Other Stations
To answer a call ringing at another station:
1. Lift the handset,
2. Dial 7 (Directed Call Pick-Up code),
3. Dial the
extension Number of the ringing station; the
call will be connected.
To answer a call ringing at a station in your
group:
1. Lift the handset,
2. Dial 566 (Group Call Pick-Up code), the call is
connected.
Using Do-Not-Disturb (DND) to Block Incoming
Calls
To toggle DND ON and OFF:
1. Press the DND button.
Forwarding calls to another Station or Voice
Mail
To activate Call Forward from your phone to
another phone or internal system resource:
1. Lift the handset,
2. Press the Fwd Soft button,
3. Dial the type of forward code 1-9 (iPECS: 1-5)
4. Dial the destination number.
Placing Intercom calls
To place an Intercom call:
. Lift the handset,
1
2. Dial the
extension number of the desired station,
3. On answer or Splash tone, speak to the called party.
Using Camp-On when calling a busy station.
To Camp-On (wait off-hook) for a busy station:
1. Press * and wait
for the extension to
Using Last Number Redial (LNR)
To dial the Last Number for an external call:
1. Lift the handset,
2. Select the Redial Soft button,
3. Press ▼ volume ▲ to select from the last 10
numbers dialed,
4. Press the Send Soft button or hold/save.
Using System Speed Dial Numbers.
To place a call using System Speed Dial:
1. Lift the handset,
2. Press the Speed button,
3. Dial the desired System Speed Dial bin number
Using and Entering Station Speed Dial
Numbers.
To place a call using Station Speed Dial:
1. Lift the handset,
2. Press Speed,
3. Dial the desired Station Speed Dial bin number
.
answer.
To enter a Station Speed Dial number with CO
Line and Name:
1. Press Trans/Pgm,
2. Press Speed,
3. Dial the desired Station Speed Dial bin number,
4. Select/dial the CO line/group,
5. Dial the desired number to be stored,
6. Press Hold/Save,
7. Enter the associated name if desired, using the
alpha-numeric entry chart,
8. Press Hold/Save.
To assign a Station Speed Dial number directly
to a Flex button:
1. Press Trans/Pgm,
2. Press the desired Flex button,
3. Select the Tel Num Soft button,
4. Select/dial the CO line/group,
5. Dial the desired number,
6. Press Hold/Save,
7. Enter the associated name if desired, using the
Character Entry chart,
8. Press Hold/Save.
ACNR: To retry a busy external number until
answered
To set up an ACNR, while on an outgoing call:
1. Use the Navigation button to display the next menu
and select the ACNR Soft button,
2. Hang-up handset.
To cancel the ACNR request:
1. Press the ACNR Soft button
Call Transfer: Sending a call to a different
destination
To Transfer an active call:
1. Press Trans/Pgm,
2. Call receiving party,
3. Hang-up with or without announcement.
Call Hold: Placing a call in a waiting state
To place a call on Hold:
1. Press Hold/Save.
Joining Multiple People in a Conference
To establish a Conference:
1. Establish call with one of the desired conference
parties,
2. Select the Conf Soft button,
3. Establish call with the other conference party,
4. Select the Conf Soft button,
5. Select the Conf Soft button again to establish the
conference.
To place a Conference on Hold:
1. Press the Hold/Save
To retrieve the Conference:
1. Select the Conf Soft button.
To make an External-parties-only Conference:
1. Establish conference with two external parties,
2. Select the Conf Soft button to exit.
To enter pre-opened Conference Room:
1. Dial 5 7 X (iPECS: 5 9 X)
room number.
.
button.
where X is the conference