Vicks V750LA Use And Care Manual page 4

Table of Contents

Advertisement

Available languages

Available languages

Setting Up Your Vicks Warm Mist Humidifier
1. Remove From Box. Remove packaging material. Set aside instruction manual. Recycle
packaging materials or save for storage.
Step 1
2. Remove twist tie from power cord and extend power cord full length. DO NOT OPERATE WITH
POWER CORD COILED OR TWIST TIE IN PLACE.
3-4. Ensure Proper Assembly. Make sure Mist Chimney and Water Tray are securely in place
and the blue latch is engaged.
5. Select a firm, level location at least 12" (30cm) from any walls.
Place the humidifier on a water-resistant surface.
Steam should be directed away from any walls, bedding or furniture.
Kaz will not accept responsibility for property damage caused by
water spillage.
WARNING
!
: KEEP OUT OF REACH OF CHILDREN.
This product produces HOT STEAM and should be placed in an area not accessible to children
or pets with the power cord also securely out of reach.
Filling / Refilling
NOTE: TANK SHOULD BE CARRIED USING TWO HANDS. ONE HAND USING CARRYING HANDLE
LOCATED ON TANK'S TOP AND OTHER HAND SHOULD SUPPORT THE BOTTOM OF THE TANK.
Step 1
1. Remove Tank by grasping handle and pulling up. Remove Tank Cap located on bottom of
Tank by turning counter clockwise.
2. Fill Tank with cool water. Do not fill with warm or hot water.
3. Replace Tank Cap by turning clockwise to screw back in place. DO NOT OVER-TIGHTEN. Place
Tank back on humidifier base.
RESET:
1. When your humidifier is out of water the refill light will illuminate
2. Turn the humidifier off, wait 15 minutes, refill Tank, and turn
humidifier back on.
4
Step 2
Step 2
Step 3
Step 3
Step 4
Step 5
Refill Light

Advertisement

Table of Contents
loading

Table of Contents