Advertisement
Fireplace Note:
Install fireplace and chimney compo-
nents as per fireplace manufacturers
installation instructions.
Fireplace Placement Note:
Prior to placing the fireplace insert for proper
removal of the fireplace stainless steel face
protective wrap, peel back the outside portions of
the protective wrap where it will come in contact
with block units, cap units and top trim piece.
www.keystonehardscapes.com
C O U R S E B Y C O U R S E I N S T R U C T I O N S
Cap Cutting Note:
Using a conccrete saw or wheel grinder tool w/
masonry disk, cut block units as needed
Cap units to be cut due to obstruction are
labeled with solid hatching.
Cap units to be cut to fit are labeled with angular
hatching.
Fireplace Hearth Capping Note:
3rd course fireplace hearth capping can be
placed after 4th course is in place (not shown
here for display purposes).
Keystone Step-by-Step Kits
9
Advertisement
