C O U R S E B Y C O U R S E I N S T R U C T I O N S
Note: Due to block outside face texture variances when building the fireplace courses, the outside
dimensions of the courses may get wider than desired. If required, cut an interior perimeter unit to
get the required outside dimension.
Block Cutting Note:
Using a concrete saw or wheel grinder tool w/masonry disk, cut block units as needed.
Block units to be cut due to obstruction are labeled with solid hatching.
Block units to be cut to fit are labeled with angular hatching.
www.keystonehardscapes.com
Keystone Step-by-Step Kits
7