3.2.5
When using an optional steel chain container, refer to the assembly drawing and instructions provided
with the container for correct assembly and attachment.
WARNING
3.2.6
Make sure the bottom hook on 2, 3 and 5 Ton double fall models is not capsized. See
3-6.
Correct all chain irregularities before conducting the first hoist operation.
3.3
Mounting Location
WARNING
3.3.1
structure are adequate to support the hoist and its loads. If necessary consult a professional that is
qualified to evaluate the adequacy of the suspension location and its supporting structure.
NOTICE
3.3.2
Verify that the load chain is not twisted or tangled prior to operating the hoist.
Figure 3-5
Twist in Load Chain – 2, 3 and 5 Ton Double Fall Models
Figure 3-6
Capsized Hook and Chain –Double Fall Models
Prior to mounting the hoist ensure that the suspension and the supporting
See
Section 6.8
for outdoor installation considerations.
16
Figures 3-5
and