Wireless A/G USB Network Adapter
3. On the Wireless Mode screen, you will need to select which mode of wireless networking you'll be using. The
first selection will automatically select between a Wireless-A and a Wireless-G networking mode. The second
selection will chose a Wireless-A network mode only, which only connects to 802.11a networks. The third
selection will chose a Wireless-G networking mode only, which only connects to 802.11g and/or 802.11b
networks.
4. From the Wireless Settings (Advanced) screen, you will need to choose a type of network. Click the
Infrastructure Mode radio button if you want your wireless computers to network with computers on your
wired network using a wireless access point. Click the Ad-Hoc Mode radio button if you want multiple
wireless computers to network directly with each other.
In the SSID field, enter the SSID of your wireless network. The SSID must be identical for all devices in the
network. The default setting is linksys (all lowercase). Click the Next button.
NOTE: Network SSIDs should be unique to your network and identical for all
devices within the network.
Chapter 4: Setting up the Wireless A/G USB Network Adapter
Using the Setup Wizard
Figure 4-3: Setup Wizard's Wireless Mode Screen
Figure 4-4: Setup Wizard's Wireless Mode Screen
8