Fcc Certification - Wavecom Q26 Elite Wireless CPU Product Manual

5

FCC Certification

The Q26 Elite is FCC certified as a 'mobile device', which requires a minimum
distance of 20 cm between the application's antenna and the human body.
Per FCC Section 15.21, any changes or modifications to the Q26 Elite not
expressly approved by Wavecom could void the user's authority to operate the
equipment.
Users and installers must be provided with antenna installation instructions
and transmitter operating conditions for satisfying RF exposure compliance.
Wavecom's FCC ID may be used by the integrator if the conditions below are
followed:
1. The application must be implemented as a "mobile device" and not a
"portable device."
2. The application's
statement that a minimum distance of 20 cm between the antenna and
the human body is required.
3. The antenna system gain must be within the following constraints:
a)
b)
4. The license module will have a FCC ID label on the module itself. The
FCC ID label must be visible as defined by the FCC (visible through an
open access door is permissible), or a separate label must be similarly
visible that conveys the message: "Contains Transceiver Module FCC ID:
O9EQ26ELITE."
© Confidential
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior
written agreement.
WI_DEV_Q26EL_UGD_002-002
user and
850 MHz Band: the antenna system gain must not exceed 5.76
dBd gain.
1900 MHz PCS Band: the antenna system gain must not
exceed 7.01 dBi gain.
installation manuals
Q26 Elite User Manual
must include a
Page: 18 / 18
April 17, 2009