Check The Wireless Network Status; Connect To A Different Wi-Fi Network; Launch A Web Connection - Zte Sprint V72C User Manual

Note: Wi-Fi networks are self-discoverable, which means no additional steps are required for
your tablet to connect to a Wi-Fi network. It may be necessary to provide a user name and
password for certain closed wireless networks.

Check the Wireless Network Status

Check the status of your current wireless network, including speed and signal strength, through
the Wi-Fi settings menu.
1. Touch >
2. Touch the wireless network that the tablet is currently connected to. You will see a
message box showing the Wi-Fi network name, status, speed, signal strength, and other
details.
Note: If you want to remove the tablet's wireless network settings, touch Forget on this window.
You will need to enter the settings again if you want to connect to this wireless network.

Connect to a Different Wi-Fi Network

Use the Wireless & networks settings to scan for and connect to a different Wi-Fi network.
1. Touch >
Wi-Fi networks section. To manually scan for available Wi-Fi networks, on the Wi-Fi
settings screen, touch
2. Touch another Wi-Fi network to connect to it.
Note: If the wireless network you want to connect to is not in the list of detected networks, touch
+. Enter the wireless network settings and touch Save.

Launch a Web Connection

Launching a Web connection is as simple as opening the browser on your tablet.
■ Touch
>
page.)
Note: Internet connections can be made either through 3G service or via Wi-Fi (configured
within the Settings > Wi-Fi page).
While connecting, you may see an animation. Once complete, you are connected to the default
home page.
Tip: To change the tablet's default launch page to your current page, touch
General > Set home page > Current page.
Web and Data
> Settings > Wi-Fi.
> Settings > Wi-Fi. Detected Wi-Fi networks are displayed in the
> Scan.
> Browser. (Your data connection starts and you see the home
> Settings >
42