Assembly And Disassembly Procedures - Acer NA23WABAS Service Manual

20
ACER V233H
Go to cover page
4.1 Assembly procedures:
Connect the cable between power board(P802)
S1
and interface board (P301)
Connect the cable between power board(P003) and
interface board(P307)
Connect the function key cable into interface
board(P308)
Connect speak cable into power board(P001)
Connect the FFC cable into interface board
Use a Phillips-head screwdriver screwed the
S2
No.1~4 screws till that power board and bracket
chassis base firmly attached.(No1~3 screw
size=M3x6; No4 screw size=M4x8;
Torque=9~10KGFxCM).
Use a Phillips-head screwdriver screwed the
S3
No.1~2 screws till that interface board and bracket
chassis base firmly attached.
(No1~2 screw size=M3x6; Torque=9~10KGFxCM).
1
2

4. Assembly and Disassembly Procedures

FFC
P001
P802
P301
P308
P307
P003
2
1
3
Fix the speaker and speaker cable, The white line
S4
in the left ,the red line in the right.
Turn the monitor faced down and put it on the
S5
bracket chassis module till both parts firmly
Connect FFC cable to LCD panel. There are
two locks over here when plugging in should be
noticed.
4
Take lamp cables out from the holes shown as the
S6
photo.
Plug in parallel direction
Angel < 5 degrees