SpinetiX Diva Getting Started

Thank you for choosing DiVA
Follow these easy steps to get started

Step 1: Connect Screen

You need a screen with an HDMI port and an HDMI cable (not included).
1
Connect one end of the HDMI cable to the HDMI port of your DiVA.
2 Connect the other end of the HDMI cable to the HDMI port of the display device.

Step 2: Connect Network

You need an Ethernet cable (not included).
1
Connect one end of the Ethernet cable into the Ethernet port of your DiVA.
2 Connect the other end of the Ethernet cable to the Ethernet port of a LAN-Switch
or computer.

Step 3: Connect Power

DiVA comes with a Power Supply Unit (PSU) and a line power cable.
1
Connect the DC power cable attached to the PSU to the DC input port of your DiVA.
2 Connect the line power cable to the PSU.
3 Connect the other end of the line power cable into a power outlet.
4 Switch on the display device and the LAN-Switch or computer.

Step 4: Setup DiVA

To set up your DiVA, follow the on-screen instructions.
1 Push the blue button of your DiVA.
2 Type the IP address shown on your screen in your browser' s address bar.
3 Follow the instructions to complete the setup.
4 Once you complete the setup, your DiVA will restart.