Sequoia Reference Guide
Chapter 7 Keypad Service Provisioning
The MIN Lock is set to "Enable" as default. When you input a new MIN, it must meet
the creterias stored in the MIN Lock table. Otherwise the phone will prompt "Invalud
MIN!".
If you want to change the MIN Lock setting, you must input SPC3 firstly.
The SPC3 is "333333" as default.
To program NAM 2
select "NAM 2" and it is almost the same as programming NAM 1.
To change SPCs
Select SPC
You can change SPC1 or SPC2 and set the max tries of SPC1 or SPC2.
7-2