Table of Contents
Advertisement
1.
press "#" several times until "abc" is
displayed at the top-right corner of the
screen, then you can input lowercased
letters.
2.
press "#" several times until "ABC" is
displayed at the top-right corner of the
screen, then you can input lowercased
letters.
3.
press alphanumeric key several
times(no longer than 0.5 seconds between
each two pressing) to enter a letter written
in the key.
4.
if the cursor is hidden, you can keep on
pressing to change current character.
current character will be entered when the
cursor appears.
5.
if you want to enter a letter which in
the same key, you must wait for 0.5
seconds until the cursor appears, so you can
press the key again. If you want to enter a
letter which in a different key, you need not
wait for the cursor, and can press the key as
you want directly.
To enter symbols or special characters
*
selected symbol
Confirm
up/down
Sequoia Reference Guide
Chapter 2 Contacts
2-3
Advertisement
Table of Contents
