Chapter 7 Keypad Service Provisioning
This is a hidden menu, and you can enter it by pressing '#*0204'.
This is protected by SPC1. The default is "111111".
Program NAM1, NAM2, or SPCs
Select the menu "Service program" and press 'Select' key.
After you input the SPC2, you can program NAM1 or NAM2. The default is "222222".
To program NAM 1
select NAM 1
There will be many parameters to be input one by one. The next will bring up when
you press "Ok", and the value you input will be stored. You can back to the previous
parameters by pressing "Back" key.
7-1