Smeg A2-6 Instructions For Installation And Use Manual page 14

Smeg range instructions for installation and use
Table of Contents

Advertisement

5.2.2 Minute-minder
This function does not stop cooking but just triggers the beeps.
-
When the
illuminates, appearing as shown in figure 1;
-
Press the
the minute-minder. Whenever a key is pressed, 1
outside segment, representing 1 cooking minute
will light up (figure 2 shows 10 cooking minutes).
-
The countdown will start 6/7 seconds after the last
key is pressed; at the end of it, you will hear the
beeps.
-
During cooking with countdown, the current time
can be displayed by pressing the
press again to return to the minute-minder display.
-
At the end of the countdown, the oven has to be
switched off by hand, by turning the thermostat
and the function selector to 0.
5.2.3
Cooking duration time: the 2
time. Before setting it, turn the thermostat to the cooking temperature of
choice and the function selector knob to any setting. To set the cooking time,
proceed as follows:
-
Press the
move to position 12 (Fig. 1).
-
Use the
whenever the
added to the cooking time, and every 12 minutes a
new inside segment will light up (figure 2 shows a
cooking time of 1 hour).
-
Once the required time has been set, cooking will
start about 6 seconds after the last time the
-
Once cooking has started, the display will show the
current time, represented by the constantly on
segments, and the minutes left until cooking
finishes, represented by the flashing segments
(every flashing segments indicates 12 minutes of
cooking time left).
50
Instructions for the user
key is pressed the display
or
keys within 6/7 seconds to set
Programming
key for 1/2 seconds; the pointer will
and
keys to set the cooking time;
key is pressed, 1 minute will be
. key is pressed.
key once;
nd
button
can be used to set the cooking
2
or
1
1
2

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents