Federal Communications Commission Interference; Statement - Acer F900 User Manual

use, the actual SAR level is usually much lower than the maximum value,
because the mobile telephone works in different output levels. It only
transmits with as much output as is required to reach the network. In general
the following applies: The closer you are to a base station, the lower the
transmission output of your mobile telephone. The highest SAR value for this
device, measured in accordance with the standard, is x W/kg.
FEDERAL COMMUNICATIONS COMMISSION
INTERFERENCE STATEMENT
This mobile device meets guidelines for exposure to radio waves. Your
mobile device is a radio transmitter and receiver. It is designed not to exceed
the limits for exposure to radio waves recommended by international
guidelines.
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
7-4