Advertisement
Quick Links
Advertisement
Related Manuals for Sigfox Access Station Micro
Summary of Contents for Sigfox Access Station Micro
-
Page 1: Quick Start
Quick Start Sigfox Access Station Micro SMBS-T4 December 2018... -
Page 2: Package Contents
Package contents Sigfox Access Station Micro Passive PoE injector Power supply adapter (select the correct plug for your region) Mounting kits Ethernet cable Safety notice Accessories available separately: 3G or 4G USB dongle Sealing cover... - Page 3 Sigfox Operator or online at micro.sigfox.com For safety information please refer to the notice included in the box. To use your Access Station Micro, you will need: Internet connection: either by Ethernet port or compatible 3G/4G USB dongle Indoor 220 / 110 V AC power outlet...
- Page 4 Installing your station Step 1 Place your station Place or fix the Access Station Micro at the desired location. Make sure you leave enough space to access the ports and you can see the side to check the LED color.
-
Page 5: Understanding The Led
Check the Support Section of this guide if you need to reconfigure the ethernet or cellular network settings. The Access Station Micro is ready and operational as soon as the boot up is done, the connectivity established and the LED is solid green. This should take less than 2 minutes in normal temperature conditions, and all LED colors depicted below may occur. - Page 6 The information presented is subject to change without notice. Sigfox assumes no responsibility for inaccuracies contained herein. Sigfox and the Sigfox logo are trademarks of Sigfox. All other trademarks are the property of their respective owners. Copyright ©2018 Sigfox.
Need help?
Do you have a question about the Access Station Micro and is the answer not in the manual?
Questions and answers