Step 4 Activation / configuration
The activation of the station on the cloud (referred as commissioning)
is done by the local Sigfox Operator.
If the station has been registered, the station is ready and operational
as soon as the boot up is done and the LED is solid green.
1 minute
Check with your local Sigfox Operator for activation or if any change in the
configuration is required.
Understanding the LED
of your station
Light is
Meaning
Then ...
Your Access Station Micro is not
Off
No power
powered. Please check the PoE power
supply is firmly attached.
Red (for a few secs) Power on
Your Access Station Micro is powering on.
If flashing continue for more than 1
Green – Flashing
Booting up (20 – 60 sec)
minute contact your support.
Your Access Station Micro is up and
Green – Solid
In Operation
running.
The Ethernet cable or USB dongle may
Orange – Flashing
No connectivity
be disconnected. Make sure that the
cable or dongle is firmly attached.
Your Access Station Micro may not
Orange – Solid
No VPN connection
be registered correctly. Contact your
support.
External temperature is too extreme.
Warming up (temp < 0°)
Purple – Solid
While your station is in cooling/warming
Cooling down (temp > 55°C)
mode, it is not in service.
If the light remains red after 1 minute
your Access Station Micro may need
replacement.
Red – Solid
No Boot
Contact the support at your point of
purchase.
Support
Thank you for choosing the Sigfox Access Station
Micro.
For more detailed information, product updates and
online manuals please check micro.sigfox.com.
For support, contact your local Sigfox Operator or
distributor.
+33 (0)5 82 08 07 10
Bâtiment E-volution
425, rue Jean Rostand
31670 Labège – France
sigfox.com
The information presented is subject to change without notice. Sigfox assumes no responsibility
for inaccuracies contained herein. Sigfox and the Sigfox logo are trademarks of Sigfox. All other
trademarks are the property of their respective owners. Copyright ©2018 Sigfox. All right reserved.
Quick Start
Sigfox Access Station Micro SMBS-T4
August 2018
Need help?
Do you have a question about the SMBS-T4 and is the answer not in the manual?
Questions and answers