Hookup And Installation; Step; Mounting Your Power (Optional) Conditioner - Belkin PureAV PF30L User Manual

Hookup and Installation

Step 1 (optional)
Mounting your Power Conditioner
The wall-mount bracket is designed to be mounted to drywall or
wood/plywood (cabinet or other wood furniture). The bracket can be mounted
horizontally or vertically and will hold the PureAV Power Conditioner securely
in either of these configurations.
For mounting to a wood surface:
1.
Use the wall-mount bracket as a template to mark the four screw locations
on the mounting surface (Fig. B).
2. Drill 3/32" pilot holes in the screw locations.
3. Attach the wall-mount bracket with the #6 x 1/2" wood screws.
4. Mount the Power Conditioner to the mounting bracket (Fig. A) by aligning
the mounting holes on the back of the Power Conditioner (Fig. C) with the
mounting screws on the surface of the wall-mount bracket (Fig. B).
For mounting to a drywall surface:
1.
Use the wall-mount bracket as a template to mark the four screw locations
on the mounting surface (Fig. B).
2. Drill 3/16" pilot holes in the screw locations.
3. Insert the plastic drywall anchors into the pilot holes.
4. Attach the wall-mount bracket with the #6 x 1" drywall screws.
5. Mount the Power Conditioner to the mounting bracket (Fig. A) by aligning
the mounting holes on the back of the Power Conditioner (Fig. C) with the
mounting screws on the surface of the wall-mount bracket (Fig. B).
Fig. A Fig. B
(Screw Locations,
Mounting Screws)
Fig. C
(Mounting Holes)
6