Table of Contents
Advertisement
2.4.1 GLOBAL INFORMATION
The following information is available from the Global view, which is the default screen for Newer RAID Management. This view is for
informational purposes only. It is not used to configure or monitor the available disks.
HBA PROPERTIES
Host Adapter Model – the type of RAID controller card detected.
Enclosure Count – the total number of drive enclosures connected to your MAXPower controller card.
Physical Drive – the total number of physical drives detected by the controller card.
Legacy Disk – the total number of physical drives previously formatted by another utility.
RAID Count – the total number of logical arrays detected.
STORAGE PROPERTIES
Total Capacity – the total capacity of all detected SSDs and HDDs that are detected.
Logical Capacity – the total capacity of all logical drives and arrays that are available.
Free Capacity – the total remaining capacity that is available for inclusion in a JBOD or additional RAID arrays.
MAXPOWER eSATA 6G-4E CARD
5
DEVICE SETUP
Advertisement
Table of Contents
