Engine Stop Switch; Engine Shut-Off Switch; Start Switch - Yamaha 2019 WaveRunner GP1800R Owner's/Operator's Manual

Control function operation
LOCK" indicator light blinks two or three
times, then comes on. This indicates the un-
lock mode is selected.
1
L-Mode
1 "L-Mode" (unlock) button
2 "UNLOCK" indicator light
EJU31153

Engine stop switch " "

The engine stop switch (red button) stops the
engine when the switch is pushed.
1
1 Engine stop switch
EJU31164

Engine shut-off switch "

The engine shut-off switch automatically
stops the engine when the clip, on the end of
the engine shut-off cord (lanyard), is removed
from the switch, such as if the operator falls
off the watercraft.
33
Insert the clip under the engine shut-off
switch before starting the engine.
2
1 Engine shut-off switch
2 Clip
3 Engine shut-off cord (lanyard)
When the engine is not running, remove the
clip from the engine shut-off switch to pre-
vent accidental starting or unauthorized op-
eration by children or others.
EJU42323

Start switch "

"
ECJ01311
NOTICE
Do not run the engine over 4000 r/min on
land. Also, do not run the engine for more
than 15 seconds without supplying water,
otherwise the engine could overheat.
The start switch (green button) starts the en-
gine when the switch is pushed.
Release the start switch as soon as the en-
gine starts to run. If the engine does not start
1
3
"
2