Advertisement
Available languages
Available languages
Charging the phone
If your phone can be charged via USB, you can use the
Parrot MINIKIT Smart to charge it (refer to your
phone user manual for more information). Use the
cable provided with your phone if necessary.
Note:
The Parrot MINIKIT Smart USB port will also allow
you to install the software updates of the kit.
Charging your phone is only possible if the Parrot
MINIKIT Smart is connected to the cigar lighter
charger.
Getting started
Turning the Parrot MINIKIT Smart on / off
Hold down the red button for 3 seconds to turn on / off the
Parrot MINIKIT Smart.
Accessing the Parrot MINIKIT Smart menu
Press the jog wheel to access the main menu.
Browse through the menus by turning the jog wheel
and confirm with the green button or by pressing the
jog wheel.
To exit the menu, press the red button or wait for a
few seconds.
English
Connecting a phone by Bluetooth
Before using the Parrot MINIKIT Smart with your phone,
you first have to pair both devices. The pairing process
is only required once.
1. From your Bluetooth
Bluetooth peripherals.
2. Select «Parrot MINIKIT Smart».
3. Enter the « 0000 » PIN code if prompted to do
so.
> The Parrot MINIKIT Smart says « Pairing
successful ».
Depending on the model of your phone, the
connection will then be automatic as soon as you
enter your vehicle.
If your phone supports the GPS feature and if it can
send the navigation instructions via Bluetooth (A2DP
profile), the navigation instructions will be played by
the Parrot MINIKIT Smart. Refer to the support
section of our website www.parrot.com for more
information about
compatibility.
®
phone, search for
the
Parrot
MINIKIT
Smart
Advertisement
