Hood (Dash/Sprint) - Sabre ELSA Dash User Instruction

ELSA DASH/SPRINT
3. If the quick-fire cord is not fitted, turn
the cylinder valve handwheel fully anti-
clockwise to open the valve.
CAUTION:
•
Ensure that finger nails and rings
do not snag or tear the neckseal.
•
Do not roll or fold the neckseal
when donning the hood.
3.3

HOOD (DASH/SPRINT)

1. Pull out the hood, insert hands
(palms together) into the neckseal and
stretch the neckseal.
2. Hold the hood with the neck seal
over the crown of the head and pull the
hood down over the head until the neck
seal is around the neck.
3. Position the mask over the face for
a good fit.
4. Breathe
HAZARD AREA IMMEDIATELY.
5. When clear of the hazard area or if it
becomes difficult to breathe, remove the
hood. The apparatus duration should
exceed the time taken to complete a
planned escape route.
6
normally. LEAVE THE