Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Victor VC02+
Summary of Contents for Victor VC02+
- Page 1 Operation Instruction for Thermocouple Calibrator - 1 -...
-
Page 2: Warranty
WARRANTY Our company warrants to the original purchaser that each product it manufactures will be free from defects in material and workmanship under normal use and service for a period of one year from date of purchase. Our company’s warranty does not apply to fuses, test leads or any product which, in our company’ s opinion, has been misused, altered, or damaged by accident or abnormal conditions of operation or handling. - Page 3 four inches of excelsior or similar shock-absorbing material. CLAIM FOR DAMAGE IN SHIPMENT TO ORIGINAL PURCHASER The instrument should be thoroughly inspected immediately upon original delivery to purchaser. All material in the container should be checked against the enclosed packing list. The manufacturer will not be responsible for shortages against the packing sheet unless notified immediately.
- Page 4 INDEX P a g e Safety Information………………………………………………………………………………………………………… 1 Instrument Panel Layout and Functions……………………………………………………………………………… 2 Instrument Maintenance………………………………………………………………………………………………… 3 Power-on/off of Instrument……………………………………………………………………………………………… 4 Output from Instrument……………………………………………………………………………………………………4 Instrument Measurement…………………………………………………………………………………………………6 Setting Function………………………………………………………………………………………………………… 7 Performance Index……………………………………………………………………………………………………… 7 Notice of the Manual………………………………………………………………………………………………………10 - 4 -...
-
Page 5: Section One Safe Use
Note • To ensure accuracy, preheat for 5 minutes after Section One Safe Use power-on. To ensure safe use, the meter and manual employ • Please contact the manufacture or dealers if the the following symbols: Users have higher accuracy requirement. Warning identifies conditions and actions that Section Two Components and Functions of Meter’s may pose hazard(s) to the user and... - Page 6 Illustration for LCD display area display range selection power-on OUTPUT indicates the meter is in output function input/out state. shift INTPUT indicates the meter is in input state. thermocou indicates the meter is in calibration cold state. output compensat clearing ion key indicates the present calibrated zero point or full point etc.
-
Page 7: Section Three Maintenance
indicates connection of output To avoid electrical shock or personal injury: signals. Remove test leads from the meter before opening the battery door. R、S、K、E、J、T、B、N: indicates graduated no. Close and latch the battery door before using of thermocouple(TC). the meter. Note Section Three Maintenance The new and old batteries can not be mixed. -
Page 8: Section Four Power On/Power Off The Meter
（ ） Automatically turn off the power The default factory value is set as: the meter will automatically turn off if no operation has been made within 15 miniutes. The Users can set by themselves to choose whether using this function or not (See the detailed section). Section Five Output of the Meter The meter generates DC current or thermocouple simulate... - Page 9 Press 〔τ〕/〔υ〕key, select output set bit; Press 〔π〕 / 〔θ〕 key , change the value of set bit, and the value can carry or abdicate automatically, and hold the key, the value will change constantly after one second. 7. Automatic compensation of cold junctions When calibrating meter with temperature cold junction compensation directly, press 〔RJ-ON〕key to start the automatic compensation function of cold...
-
Page 10: Section Six Measurement
（R、 S graduation） 、 400°C （B graduation） 、 0000.0°C 6-1: （other graduation）. Press 〔℃/℉〕key , select Centigrade or Fahrenheit unit. Section Six Measurement Warning Usage: the maximum voltage allowed between the terminals and within the terminals and the ground is 30V, any exceeding over this voltage may cause damage to the meter and even make injury to persons. -
Page 11: Section Seven Function Setting
Press 〔INPUT/OUTPUT〕 key , and the LCD displays Press 〔℃/℉〕key , select Centigrade or Fahrenheit unit. ‘INPUT’，indicating the meter is in input state; Section Seven Function Setting Press 【FUN】 key , select thermocouple(TC) function, and display ‘°C’ unit and ‘R’ graduation no.; The following operation can change the automatic Press 〔RANG〕... - Page 12 0.1mV 0.05%+0.3mV -0.1000～1.1000V Employs ITS-90 -40～1760℃ 1℃ 0.05%+3 （ less than or equals to temperature 100°C） standard 0.05%+2（more than 100°C） -20～1760℃ 1℃ The accuracy does include 0.05%+3 （ less than or equals to error interior 400～1800℃ 1℃ 600°C） temperature 0.05%+2（more than 600°C） compensation sensor -200.0～1000.0℃...
- Page 13 The accuracy does not include the error 0.05%+2（more than 100°C） -200°C～1760°C of interior temperature compensation sensor 0.05%+3(less than or equals to The accuracy does not include the 600°C） 400°C～1800°C impact of interior thermoelectric force 0.05%+2（more than 600°C） -200.0°C～1370.0°C -200.0°C～1000.0°C 0.05%+20（less than or equals to -200.0°C～1200.0°C -100°C）...
-
Page 14: Section Nine Note For The Manual
weight about 500g accessory User’s Manual, industrial testing lead CF-36 (clips for probe) safety complies with IEC1010 (safety standard issued by International Electrician Committee) Section Nine Note for the Manual The present operation instruction is subject to change without notice; The content of the operation instruction is regarded as correct.
Need help?
Do you have a question about the VC02+ and is the answer not in the manual?
Questions and answers