Belkin OMNIVIEW PRO3 F1DA208ZEA Quick Install Manual page 2

To install the Switch, you will need the following:
OmniView PRO3 Rack-Mount 12V/1A Power
VGA Monitor
Dual-User KVM Brackets with Supply (included with
Switch (included) Screws (included) Schuko and Uk plug
USB or PS/2 Mouse Belkin Dual-Port
USB or PS/2 Keyboard
Micro-Cable Kit
[Belkin Part No. F1D9400-XX
(PS/2-style) or F1D9401-XX
(USB-style)]
Introduction
This Quick Installation Guide will guide you through the steps needed to install
the OmniView PRO3 Dual-User KVM Switch (the Switch).
If you have any problems during this installation, please refer to the User Manual.
Introduction | 1