Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Microtec Manuals
  4. Printer
  5. DCH-800
  6. Assembly manual

Microtec DCH-800 Assembly Manual

Digital combo heat press
Hide thumbs Also See for DCH-800:

Advertisement

Quick Links

Download this manual See also: Manual
Digital Combo Heat Press Manual
CONTENTS
CONTENTS
CONTENTS
I. As
I. As
I. Assembly Drawing -----------------------------------------------------------------------------------2
II. Technical Parameters ------------------------------------------------------------------------------2
III. Heating Elements Exchange Instruction -------------------------------------------------3-5
IV. Operation Process -------------------------------------------------------------------------------6-7
V. Maintenance -------------------------------------------------------------------------------------------8
VI. Trouble Shooting For Transfer Print Quality-----------------------------------------------8
VII. Circuit Diagram -------------------------------------------------------------------------------------9
VIII. Explosion View--------------------------------------------------------------------------------10-11
Model No.: DCH-800
- 1 -

Advertisement

loading
Need help?

Need help?

Do you have a question about the DCH-800 and is the answer not in the manual?

Questions and answers

Related Manuals for Microtec DCH-800

Summary of Contents for Microtec DCH-800

  • Page 1: Table Of Contents

    Digital Combo Heat Press Manual Model No.: DCH-800 CONTENTS CONTENTS CONTENTS I. Assembly Drawing -----------------------------------------------------------------------------------2 I. As I. As II. Technical Parameters ------------------------------------------------------------------------------2 III. Heating Elements Exchange Instruction -------------------------------------------------3-5 IV. Operation Process -------------------------------------------------------------------------------6-7 V. Maintenance -------------------------------------------------------------------------------------------8 VI. Trouble Shooting For Transfer Print Quality-----------------------------------------------8 VII.

  • Page 2: Assembly Drawing

    Screw for Fast Release Fuse Fuse Fuse II. Technical Parameters Technical Parameters echnical Parameters 1. Model No.: DCH-800 1. Model No.: DCH-800 1. Model No.: DCH-800 2. Machine Dimension: 565*380*450mm 2. Machine Dimension 2. Machine Dimensio 3. Heat Platen Size:15''x15''(38x38cm) 3.

  • Page 3: Heating Elements Exchange Instruction

    III. Heating Elements Exchange Instruction Plate Heat Element Please loosen the screws marked in red. Unplug the power connector as the above picture shown. Remove the heat platen. Remove the heat Remove the heat Tighten the screws of plate heat element and connect the wire of plate heat element to the power Tighten the sc Tighten the s connector.
  • Page 4 Mug Heat Element Disconnect the power connector of heat platen as the above picture shown. Connect the mug heat element wire to power connector and plug in the other wire to aviation socket. e other wire to aviation socket. e other wire to aviation socket. Cap Heat Element Please loosen the screws marked in red.
  • Page 5 Tighten the screws of cap heat element, then connect the wire to the power connector. power connector. ower connector. - 5 -...

  • Page 6: Operation Process

    IV. Operation Process 1. Set temperature required Turn on power switch, temperature Press button, the temp button, the temp button, the temp light light Press button, the light is light is ON. The digital display shows on (C denotes Celsius). Press is on.
  • Page 7 Step 5: Consult the Transfer Paper instructions on whether to peel cold or hot, Here are suggested Pressing time guidelines for different transfer paper. Ink-Jet Transfer Paper (fabric) 14-18 seconds Laser Copier/Printer Transfer Paper (fabric) 18-25 seconds Sublimation Transfers (onto Fabrics) 25-30 seconds Sublimation Transfers (onto FR-Plastic/Woods) 60-70 seconds pls use the similar way to transfer other items after you exchange the heating elements.

  • Page 8: Maintenance

    V. Maintenance 1. No action after turn on the machine 1). Check the plug whether it connects well or whether it is broken. 2). Check the power switch or digital controller whether it is broken. 3). Check the fuse whether it has been burnt out. 4).

  • Page 9: Circuit Diagram

    VII. Circuit Diagram K1:Limit Switch .: Power Switch .: Power Switch .: Power Switch SJ: Digital Controller :Heating Pipe FU: Fuse FU: Fuse FU: F T: Transformer R1: Relay - 9 -...

  • Page 10: Explosion View

    VIII. Explosion View - 10 -...
  • Page 11 Part Name Iron Arm Machine Base Pressure Adjuster Rubber Foot Male Socket Screw Female Socket Under Plate Stander Hand Wheel Screw for Fast Release Female Socket Under Plate GY-04 Digital Controller Screw Electrical Case Heat Platen Solid State Relay Heat Platen Cover Transformer Adapter Plate Power Switch...