GE AJCM10ACG Installation Information page 2

AJCM10ACG
GE Appliances 115 Volt Built-in Cool-only Room Air Conditioner
Built-in RAC Installation
Dimensions (in inChes)
(Pub. 1-G003 pg. 138) April 30.1993
installation information: A finished opening
(Pub. 1-G003 pg. 138) April 30.1993
of 26-1/8" x 15-3/4" clear of intrusions is required. Keep
clearance of 4" from side walls. Brick veneer or frame
Built-In Room Air Conditioners
walls should have wood studding surrounding case to
Wall Opening for RAB36/37/38 Case
Built-In Room Air Conditioners
provide firm anchoring with screws. Case can be fastened
A finished opening of 26-1/8" x 15-3/4", clear of
Wall Opening for RAB36/37/38 Case
directly to brick or block walls with screws sunk in lead
intrusions, is required. Keep clearance of 4" from
expansion shields.
A finished opening of 26-1/8" x 15-3/4", clear of
side walls. Brick veneer or frame walls should have
intrusions, is required. Keep clearance of 4" from
note: Units should be caulked on all four sides of case
wood studding surrounding case to provide firm
side walls. Brick veneer or frame walls should have
anchoring with screws. Case can be fastened directly
to the building exterior to assure building integrity.
wood studding surrounding case to provide firm
to brick or block walls with screws sunk in lead
Wall Case for tenant option installation
anchoring with screws. Case can be fastened directly
expansion shields.
When the air conditioner is offered as a tenant option, this
to brick or block walls with screws sunk in lead
expansion shields.
wall case provides protection against outside elements.
raB48 – includes wall case, exterior grille,
steel closure panel and two layers of insulation.
stanDarD Wall Case raB46
Solid-sided wall case fabricated of galvanized steel
with baked enamel finish. Welded areas are coated with
a sealing compound to help resist rust and corrosion.
Polymer gasket surrounds opening to assure tight weather
seal. Aluminum grille (RAG13) is included. Panels on
interior and between case and grille provide weather
protection prior to installation of chassis. Provide
firm anchoring with screws. Case can be fastened
directly to brick or block walls with screws sunk in
lead expansion shields.
For answers to your Monogram, GE Café
GE Appliances product questions, visit our website at geappliances.com
or call GE Answer Center
Built-in RAC Installation
™ Series, GE Profile
® Service, 800.626.2000.
Make frame if desired or caulk
between case and siding
Make frame if desired or caulk
between case and siding
15-3/4
26-1/8
Frame Construction
Frame Construction
Lintel
15-3/4
26-1/8
Fill open cells
with mortar
Brick Block and Brick
or insulation
Frame Construction
Brick Block and Brick
Frame Construction
Plaster Line
Lintel
Lintel
OUTSIDE INSIDE
16-7/8
OUTSIDE
™ Series or
Caulking
Drip Rail
Caulking
Flexible Mounting Position Drip Rail
26-1/8
Brick Block and Brick
Frame Construction
Lintel
OUTSIDE
16-7/8
15-3/4
Caulking
26-1/8
Drip Rail
Flexible Mounting Position
Lintel
15-3/4
26-1/8
Fill open cells
with mortar
or insulation
Plaster Line
Trim Molding
(if desired)
Trim Molding
(if desired)
Total volume and shelf
area are calculated by
the Association of Home
Appliance Manufacturers'
INSIDE
16-7/8
standards.
15-3/4
Fill open cells
with mortar
or insulation
Plaster Line
Trim Molding
(if desired)
INSIDE
Listed by
Underwriters
Laboratories
Specification Created 2/16