GE AJCM10ACD User Manual
Room air conditioner
Hide thumbs
Also See for AJCM10ACD:
- Specifications (3 pages) ,
- Energy manual (1 page) ,
- Owner's manual (72 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for GE AJCM10ACD
Summary of Contents for GE AJCM10ACD
- Page 8 The unit leaves the factory set at the CLOSE position. Locating hole Locating hole Screw hole Screw hole OPEN position CLOSE position (Mesh end toward back) (Mesh end toward front) Fan Cycle/Continuous - Cool Fan Cycle/Continuous - Heat (on some models) Class 2 (on some models) No function (reserved for future use)
- Page 9 Terminal connections location under front grille...
- Page 10 Grille On some models On some models Grille...
- Page 11 FRONT FRONT Dirty filter—Needs cleaning Clogged filter—Greatly reduces cooling, heating and airflow.
- Page 12 • • • • • • • • •...
- Page 13 Phillips-head screwdriver Ruler or Tape Measure Scissors or knife Drill Hand or Saber Saw Level Pencil Adjustable Wrench...
- Page 14 Locking plate Remove screw Remove shipping pads (if present) Base pan Power cord Clamp...
- Page 15 Brick veneer Lintel angle (if required) Caulking (on all 4 sides on the outside and inside of the case) Caulking (above and below the flashing) Flashing (drip rail) 1/4 min. extension inside the wall from the trim molding Caulking Plaster line Trim molding (if desired) Room side...
- Page 16 Vinyl window gasket Foam top window gasket Case top gasket Bottom window gasket Window locking bracket Air conditioner Support bracket hardware Spacer (2) Lock nut (2) Type E (4) Adjusting bolt (2) Large washer (2) 17 min. 31 to 43 (With filler panels) ⁄...
- Page 17 1/2 higher than frame Stool Storm window frame Locking plate Remove screw Remove screw Wood Clips Insert the 2 long screws on the outside Remove shipping pads (if present) Insert the 2 short screws on the inside...
- Page 18 Centerline Sill Outside ⁄ Inside Stool Type B Type E Sill support Lock nut Adjusting bolt Large washer (for use with wood sills) Screws are in position Sill support “V” notch Inside Stool Bolt Sill Outside ⁄ Stool Spacer mounting screws Type (A) Spacer •...
- Page 19 Sill Window track Outside ⁄ Width of the air conditioner Inside Left side (panel marks) Right Left side side Filler Panels Cut panels and discard center piece Gasket Angle Gasket ⁄ Right side Hook the tab into the sill support Angle Type C (painted...
- Page 20 Bottom window gasket Case holes • • Panel tabs Case screws Put the gasket on top of the case where the window will close. Panel tab Vinyl window gasket Attach the panel tab to the window on each side with a type D screw.
- Page 21 Locking plate Tighten screw Base pan Power cord Clamp...
- Page 22 • • • • • • • • • • • • • • • • • •...