TTS InO-Bot Scratch Teachers Manual page 12

5. Click on the icon by InO-Bot and then click on 'Next'.
6. Once a connection is made the screen below will be shown. Click on 'Close'.
7. Click on this message or icon to view the driver installation progress (shown
below).
8. Windows will automatically
install the required drivers.
9. Once the drivers are installed the message below will be shown. Click on
'Close'.
Note: Steps 2 to 9 above only need to be
completed once for an InO-Bot to be used.
Once complete the computer will remember
that particular InO-Bot.