NOTE
• "
No function" appears on the display for the models not equipped with the Louver lock setting.
• Push the [
CANCEL] button to stop the setting procedure. No setting has been made and the screen returns to
"Louver setting".
• "
" appears on the display when the Louver lock function is used.
∧
• Push the [
] / [
the lock.
• Condensation may occur if the louver is locked in the position (4) or (5) while cooling.
∨
] button repeatedly to select the "Not locked" setting as the louver direction to release
– 17 –
Owner's Manual