Advertisement
TROUBLESHOOTING
Please read this instruction manual carefully before sending to after-sale
service center. Following are troubles and solutions for your reference.
TROUBLE
POSSIBLE REASON
The robot is entangled
Abnormal sound
or trapped
Works only for a
The brush wheel can
short time even
not operate or battery
battery is fully
defected
charged
1. Machine is trapped.
Machine stops when
2. Brush wheel or side
in operation, LED
brush is entangled.
indicator ashes
quickly
3. Machine malfunction
LED indicator ashes
Low battery
slowly
1. Dust in the universal
Without obstacle
wheel
ahead, machine often
2. Dirt in anti-falling
makes wrong turn
sensor
Machine often back
There's some objects
and forth in the same
under the machine
spot
Machine falls from
Malfunction on
height or upstairs
anti-falling sensor
Robot often stops
1. Lack of light under bed
under the bed
2. Dirt on light sensor
Serious deform of
Normal damages
side brush
Side brush does not
Side brush is entangled
work in operation
by hair
Button can not pop out
Dustbin won't close
after pressing in
5
www.PyleUSA.com
SOLUTION
Clear the debris surrounding
the brush wheel
Remove the brush wheel and
clear it. If still does not work,
consult distributor to replace
new battery
1. Put the machine to a
spacious place to restart
2. Clean the brush wheel or
side brush
3. Restart the machine, send it
to after-sale service center if
problem still exists.
Recharge the machine
1. Remove universal wheel,
open the cover board, clean
the dust.
2. Clean the anti-falling sensor
Check if it s an even oor or
if theres any object under
the machine
Clean the anti-falling sensor
by soft cloth or tissue. send it
to after-sale service center if
theres still problem.
1. Working room is dark, open
window or turn on the light
2. Clean the light sensor
Replace new side brush
Take o the brush and
remove the hairs
Remove the screws in the
dustin cover, take o the
button cover, clean and
reinstall.
6
www.PyleUSA.com
Advertisement
