Advertisement
CAREFULLY READ THIS MANUAL BEFORE OPERATING THE MACHINE.
ANY WRONG OPERATION MAY CAUSE DAMAGE OR INJURIES.
SAFETY INSTRUCTIONS:
1. Do not use next to steps or on balconies. This machine does not have step
avoidance sensors.
2. This machine is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities. It is not also intended for
use by those with a lack of knowledge and experience, unless they have
been given instruction or supervision concerning the use of the machine by
a person responsible for their safety.
3. This appliance is for indoor use only.
4. This unit is suitable for low to medium le carpet. It is not suitable for
uneven oor or in mixed carpet.
5. Take o the side brush when cleaning undercoat carpet to protect the side
brush.
6. A damaged power supply should be replaced only with the original parts
from manufacturer.
7. Do not use on wet or greasy dust.
8. Before operation, move away the fragile things (glass, light and etc) and
other things possibly entangle brushes (long hair, plastic bag, rope, wire etc.)
9. Don't sit on the machine or put heavy things on it.
l0. Clean the machine regularly. Empty the dust container.
11. If the robot is not to be used for more than 3 months, charge the robot
sweeper for 12 hours
12. Charge only when it alarms for low power or powers o . Fully charge the
robot sweeper before use.
13. Battery can be recycled if the machine breaks.
COMPONENTS
1
2
3
4
5
1. Cli Detection Sensor
2. Side Brush
3. Right Wheel
4. Charger Port
5. On/O Button
1
www.PyleUSA.com
6
7
8
9
10
11
12
11. Dustbin Release Button
12. Universal Wheel
6. Battery Cover
13. Start/Pause Button
7. Middle Brush Holder
14. LED Indicator
8. Left Wheel
15. Light Sensor
9. Brush Wheel
16. Handle
10. Dustbin
17. Obstacle Sensor
HOW TO ASSEMBLE SIDE BRUSH:
There is a hexagonal hole at the bottom of side brush, align the brush
and press it until clicks in.
HOW TO OPERATE
1. Before activating the machine, make sure the dust bin is empty, brush
wheel and side brush are assembled properly .
2. Remove any object from the area to be cleaned in advance.
3. Turn on the power button, music will play accordingly. LED indicator is on,
the machine will enter stand by status.
4. Press Start/Pause button, machine will start working.
13
5. When in operation, press start/pause button and the machine will stop
14
temporarily
15
6. When machine stops unexpectedly, LED indicator will blink in 3Hz, please
16
check carefully if machine being entangled or brush wheel fails to operate,
if machine is being entangled, place it to a spacious place to re-start, if
brush wheel fails to operate, take it out and clean. If the machine still won't
start properly and malfunction happens, long press ON/OFF button to
17
power o the machine, and start again. If the malfunction still exists, send
the machine to a service center for repairing.
7. When machine stops working, LED indicator will slow ashes lHz, which
means low battery, please charge it in time. The LED indicator ashes when
charging and will constantly on after fully charged, plug out the charger
when fully charged.
Hexagonal Hole
face down
2
www.PyleUSA.com
Advertisement
