Sony WALKMAN NWZ-A15 Help Manual page 130

Set the HOLD switch to protect your Walkman against accidental operation during transportation.
Slide the HOLD switch in the direction of the arrow (
the opposite position to release the HOLD function.
9. Access lamp
10. microSD card slot
Open the cover before inserting a microSD card. Insert a microSD card until it clicks into place to increase the
available memory of your Walkman.
11. Slot cover
12. Strap hole
Use to attach a strap (not supplied).
13. Built-in Bluetooth antenna
Do not cover the antenna part with your hands or other object when a Bluetooth connection is active. Doing so may
interrupt the connection.
14. N-mark
Touch a Bluetooth audio device equipped with the NFC function to this mark to connect it to your Walkman.
15. RESET button
Press the RESET button with a small pin, etc. to reset your Walkman.
(*1)
Sound is not emitted from the wired headphones while your Walkman is connected to a device via a Bluetooth connection.
Disconnect the Bluetooth connection to use wired headphones.
Installing your Walkman in a peripheral device such as a cradle
You may need to use an adaptor to install your Walkman in a peripheral device such as a cradle. In this case, use the
adaptor (Type A) supplied with the device.
Related Topic
Turning the power on
Turning the power off
Home menu
How to use the Home menu
How to use the option menu
Using the HOLD switch
Inserting a microSD card
Resetting your Walkman
) to disable all operation buttons. Slide the HOLD switch to
118