Service Manual MAESTROKITCHEN MK100 Sound system. CONTENTS PARTS LIST PACKING, SPEAKERS UNIT ASSEMBLY PROCESS PACKING, CONTROL UNIT SCHEMATIC DIAGRAMS PACKING, SHIPPING EXPLODED VIEW AND PARTS Released EU2012 Harman Consumer Group, Inc. Rev 0, 3/2012 8500 Balboa Boulevard Northridge, California 91329...
Page 2
Harman Kardon MK 100 Service Manual Page 2 of 47...
Page 3
Harman Kardon MK 100 Service Manual Q'TY ITEM DESCRIPTION XXXXXXXX 5050000185H7 LEFT EPE 251*125*115MM FOR NM-400-MM RIGHT EPE 251*125*115MM FOR NM-400-MM 5050000186H7 5050000184H7 FRONT EPE 125*100*55MM FOR NM-400-MM PE BAG 850*320MM FOR NM-400-MM(東立) 501000019687 INNER BOX FOR NM-400-MM 508000062147 5230000324D7 Paper tray for NM-400-MM Cable Kits 4000mm BLK C19922045(鈺滿榮)
Harman Kardon MK 100 Service Manual Step 1 : PCB fixed on the bottom cover Bottom cover Audio board Power board Main board Use MACHINE SCREW with washer M3.0*L5.0mm x15pcs Page 10 of 47...
Page 11
Harman Kardon MK 100 Service Manual Step 2: CD ROM fixed on the bottom cover FFC CABLE 18PIN P=1mm L=200mm B18200C334FP25*10*5-R3 EMI CORE 65R@100MHz FP 25*10*5-R3(SPORTO a. CD ROM FFC cable need through the frame hole b. CD ROM FFC cable contact on the audio board C.
Page 12
Harman Kardon MK 100 Service Manual Step 3: PCB cable contact Power Control Cable 4Pin L=80 PIN P=0.5mm L=50mm Power Control Cable 8Pin L=38 EVA form Audio board Power board main board Use nut to fixed Power Control Cable 8P L=97...
Page 13
Harman Kardon MK 100 Service Manual Front cover assembly process Page 13 of 47...
Page 14
Harman Kardon MK 100 Service Manual Step 1 : PCB process and front cover assembly a. Adhesive with reflection film tape on the PCB front side Power touch PCB CD touch PCB b. PCB front side tape on the front cover...
Page 15
Harman Kardon MK 100 Service Manual Step 2 : front cover PCB cable process FFC cable 图5 PCB Sticks on the front cover 图7 图6 Navigation board CD touch board Tape the sponge on the board back side: CD TOUCH BOARD CUSHION PORON ML-32...
Page 16
Harman Kardon MK 100 Service Manual Step 3 : front cover LCD process LCD cushion x 4pcs LCD with core a. LCD cushion on the front cover b. Put on LCD on the front cover c. Add the electric conductivity...
Page 17
Harman Kardon MK 100 Service Manual Step 4 : front cover backing plate process EVA form Tape on the backing plate Backing plate Fixed on the front cover Hardware, Self-Tapping Screw, M3x8mm x 12pcs CD Non-Woven Sheet Slit felt on the front side...
Page 18
Harman Kardon MK 100 Service Manual unit assembly process Page 18 of 47...
Page 19
Harman Kardon MK 100 Service Manual Step 1 : front cover assembly and bottom cover assembly a. Front cover and bottom cover assembly b. Use screw to fixed (6pcs) c. cable contact on the board Side screw x2pcs Bottom side screw x4pcs...
Page 20
Harman Kardon MK 100 Service Manual Step 2 : Top cover slide into the assembly Hardware, Screw, M3x5mm, Phillips Pan head, MACHINE, BLACK OXIDE (13pcs) Top side screw 5pcs Side screw x4pcs Hardware, Self-Tapping Screw, M3x8mm x4pcs Rear side screw x4pcs...
Page 21
Harman Kardon MK 100 Service Manual Step 3 : Glass lens put into the assembly Glass lens adhesive on the front cover Glass lens assembly Page 21 of 47...
Page 29
Harman Kardon MK 100 Service Manual DAB Module 1. Please use module pin #20 GPIO3[9] for SPIM_nCS1 in slave mode. 5V_DAB The pin #36 SPIM_nCS0 has been used for the module Flash memory access. CON6 CON6 CON7 CON7 → →...
Page 35
36.3.3.1 DQ, DM and DQS Signals MK 100 Service Manual Refer to Figure 65 and Table 41 for length rules on the DQ,DM and DQS signals. Table 41 : Absolute Length Rules for DQ,DM andDQS Signal Group Trace Max Length Typical Trace Min Trace T0(break-out)